Instrumentation cable FRHF PYRO

Name: Instrumentation cable FRHF PYRO
Brand: Würth Elektronik Oy
SKU: WS0234022M

INSTRUMENTATION CABLE FRHF 2X2X0,8 E30

Art.-no. WS0234022M

EAN 6410002340228

All versions

Specification

Fire-resistant instrumentation cables are used in locations where special protection from fire and flames is needed to protect people and equipment and where particularly strict safety regulations must be followed. Suitable for indoor use. For outdoor use, the product must be protected from direct sunlight. The cable may be installed directly in the ground or water only if a protective tube is used.

EN 50200 (PH120), EN 50362, IEC 60331-11/-21 (FE180)

Technical information

Conductor material	Copper
Conductor surface	Bare
Diameter conductor	0.8 mm
Nominal cross section conductor	0.5 mm²
Conductor category	Class 1 = solid
Number of cores	4
Screen over stranding	Foil
Suitable for underground installation	No
Protective sheath	Other
Material outer sheath	Polyolefin
Colour outer sheath	Orange
Cable geometry	Round
Halogen free according to EN 60754-1/2	Yes
Halogen free according to EN IEC 60754-2	Yes
Flame retardant	According to IEC/EN 60332-3-22
Low smoke (according to EN 61034-2)	Yes
Low smoke according to EN IEC 61034-2	Yes
Oil resistant according to EN IEC 60811-404	No
Oil resistant (acc. IEC 60811-404)	No
Insulation integrity in accordance with IEC 60331	Yes
Circuit integrity	E30
Outer diameter approx.	6 mm
Permitted cable outer temperature during assembling/handling	-5-50 °C
Permitted cable outer temperature after assembling without vibration	-30-70 °C
UV resistant	No
Certified for shipboard application	No
Suitable as computer data cable	Yes
Suitable as signalling cable	Yes
E-number Finland	0234022