Instrumentation cable FRHF PYRO
INSTRUMENTATION CABLE PYRO FRHF 4X2X0,8
With registration you can access the Würth Elektro online shop selection.
Fire-resistant instrumentation cables are used in locations where special protection from fire and flames is needed to protect people and equipment and where particularly strict safety regulations must be followed. Suitable for indoor use. For outdoor use, the product must be protected from direct sunlight. The cable may be installed directly in the ground or water only if a protective tube is used.
EN 50200 (PH120), EN 50362, IEC 60331-11/-21 (FE180)
Datasheets(X)
Conductor material | Copper |
Conductor surface | Bare |
Diameter conductor | 0.8 mm |
Nominal cross section conductor | 0.5 mm² |
Conductor category | Class 1 = solid |
Number of cores | 8 |
Screen over stranding | Foil |
Suitable for underground installation | No |
Protective sheath | Other |
Material outer sheath | Polyolefin |
Colour outer sheath | Orange |
Cable geometry | Round |
Halogen free according to EN 60754-1/2 | Yes |
Halogen free according to EN IEC 60754-2 | Yes |
Flame retardant | According to IEC/EN 60332-3-22 |
Low smoke (according to EN 61034-2) | Yes |
Low smoke according to EN IEC 61034-2 | Yes |
Oil resistant according to EN IEC 60811-404 | No |
Oil resistant (acc. IEC 60811-404) | No |
Insulation integrity in accordance with IEC 60331 | Yes |
Circuit integrity | E30 |
Outer diameter approx. | 9 mm |
Permitted cable outer temperature during assembling/handling | -5-50 °C |
Permitted cable outer temperature after assembling without vibration | -30-70 °C |
UV resistant | No |
Certified for shipboard application | No |
Suitable as computer data cable | Yes |
Suitable as signalling cable | Yes |