Hexagon screw, countersunk head
ISO 10642, stainless steel A4-070, plain
ISO 10642 A4/070 M3X6
With registration you can access the Würth Elektro online shop selection.
- Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and possibly do not meet tensile or torsional strength requirements.
- The mechanical properties of the screw are the same and meet the requirements of ISO 3506-1
- Depending on the length of the screw, these items are provided with a thread that comes near the head
- Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 shape F
DIN 7991 has been withdrawn and replaced by ISO 10642. ISO 10642 replaces DIN 7991 | There are some limited consistencies (some screw head heights and diameters have been amended | the M18, M22, and M24 nominal diameters have been removed | stainless steel models have been removed | property classes 10.9 and 12.9 have been added).
Due to their head geometry, these screws can only be subjected to limited loads; see DIN EN ISO 3506-1
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M3 |
Length (l) | 6 mm |
Head diameter (d) | 5.81 mm |
Head height (k) | 1.86 mm |
Standards | ISO 10642 |
Material | Stainless steel A4 |
Property class | 070 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Internal drive | HS2 inch |
Thread type | Metric thread |
Pitch | 0.5 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Circuit board support TRBHL1
Enclosed industrial luminaire Damp Proof Special, IP67
Office luminaire Linear IndiviLED Direct
Outlet flange for switchgears Basset
Valena Life with Netatmo awake/sleep switch
Coupling sleeve straight OBO
Plastofast, countersunk head
Heat shrink hose with adhesive: FRG8003
Cable channel Flexible rectangular EC
Elbow fitting SEM-FAST M