Hexagon screw, countersunk head
ISO 10642, stainless steel A4-070, plain
ISO 10642 A4/070 M6X10
With registration you can access the Würth Elektro online shop selection.
- Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and possibly do not meet tensile or torsional strength requirements.
- The mechanical properties of the screw are the same and meet the requirements of ISO 3506-1
- Depending on the length of the screw, these items are provided with a thread that comes near the head
- Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 shape F
DIN 7991 has been withdrawn and replaced by ISO 10642. ISO 10642 replaces DIN 7991 | There are some limited consistencies (some screw head heights and diameters have been amended | the M18, M22, and M24 nominal diameters have been removed | stainless steel models have been removed | property classes 10.9 and 12.9 have been added).
Due to their head geometry, these screws can only be subjected to limited loads; see DIN EN ISO 3506-1
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
Length (l) | 10 mm |
Head diameter (d) | 12.16 mm |
Head height (k) | 3.72 mm |
Standards | ISO 10642 |
Material | Stainless steel A4 |
Property class | 070 |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Countersunk head |
Drive type | Hexagon socket |
Internal drive | HS4 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
Three-phase residual current device IP44, electric power
Terminal block 2016 series 3 conductor TOPJOB® S
Handle-type fuse Mersen
Hexagon socket screw, flat cylinder head
Surface-mounted frame 40/100 Impressivo
Threaded rod
Heat shrink hose with adhesive: FRG8003
Electronic control gear QUICKTRONIC FQ
Wire end ferrule Insulated For one conductor
Defrosting cable Frostvakt 25