Tapping screw pan head ISO 14585-C
Tapping screw, pan head, ISO 14585, TX, acid-resisting steel A4, type C
ISO 14585-C TX20 A4 4,2X19
Art.-no.
425042 19
EAN 4050382438980
-
Show availability at another Center
In order to check the stock in a Würth Elektronik Oy branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user?\r\nPlease go to the WürthElektroShop registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 4.2 mm |
Length | 19 mm |
Head diameter (d) | 8 mm |
Head height | 3.1 mm |
Last viewed
LED lamp OSRAM DULUX S LED 11
Fastening screw set Exxact
Cable trunk adhesive tape mounting Ultra mini strip Exxact
Defrosting cable Ebeco Frostvakt 10
Circuit breaker
Motion detector LUXA IP55 180
Blind rivet domed head open
Hexagon socket screw, flat cylinder head
Motor protection switch MS132
Pipe end cap plastic