Tapping screw pan head ISO 14585-C
Tapping screw, pan head, ISO 14585-C, TX, stainless steel A2, type C
ISO 14585-C TX25 A2 4,8X13
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter (d) | 4.8 mm |
Length (l) | 13 mm |
Head diameter (d) | 9.5 mm |
Head height (k) | 3.7 mm |
Last viewed
Fluorescent tube T5 L Lumilux
Corner component KS90 hot dip galvanised, Meka
Set screw, hex socket, cone point
Taptite DIN 7500-M, countersunk head, thread rolling
Power cable AMCMK Eca
Spotlight Tracklight Spot
Hexagon screw, full thread
Wire shelf WMT Acid-resisting steel, Meka
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Straight adapter MPCB MPX3