Tapping screw pan head ISO 14585-C
Tapping screw, pan head, ISO 14585-C, TX, stainless steel A2, type C
ISO 14585-C TX25 A2 5,5X16
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
 | |
Nominal diameter (d) | 5.5 mm |
Length (l) | 16 mm |
Head diameter (d) | 11 mm |
Head height (k) | 4 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Valena Allure with Netatmo group/turn button
Surface-mounted RCD outlet IP21 Impressivo
Interconnector for mounting boxes ABB PMR490
Heater mat Thermoflex Kit 500
Contactor AF52
Pipe end cap plastic
LED lamp OSRAM VINTAGE 1906 LED NON-DIM
Taptite DIN 7500-M, countersunk head, thread rolling
Lighting rail cover plate CP3, Unipro
Floor plate PPU zinc plated, Meka