Tapping screw pan head ISO 14585-C
Tapping screw, pan head, ISO 14585-C, TX, zinc-plated steel, type C
ISO 14585-C TX25 A2K 5,5X16
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter (d) | 5.500 mm |
Length (l) | 16 mm |
Head diameter (d) | 11 mm |
Head height (k) | 4 mm |
Last viewed
Gel joint IP68 Reliseal
Terminal block 2000 series double-deck 2 conductor TOPJOB® S
LED power source 12V IP20 standard FTLight
Universal tapping block OJL 400, 95-240mm²
Cable tie adhesive surface natural TRMWSEB
Ceiling bracket RK Meka
Terminal block 2002 series triple-deck 2 conductor TOPJOB® S
Power plug male IP67, phase inverter
Cover plate 85 mm for double outlet Jussi
Rubber cable NSGAFÖU 1.8/3 kV