Tapping screw pan head ISO 14585-C
Tapping screw, pan head, ISO 14585-C, TX, zinc-plated steel, type C
ISO 14585-C TX25 ZP 4,8X16
Art.-no.
411548 16
EAN 6438548036733
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 4.8 mm |
Length | 16 mm |
Head diameter (d) | 9.5 mm |
Head height | 3.7 mm |
Last viewed
Taptite DIN 7500-M, countersunk head, thread rolling
Installation conductor H07V2-K MKEM 90
Vehicle cable (AJM) RKXB
Taptite DIN 7500-C, cylinder head, PZ, thread-rolling screw
End plate 2007 series
Flush-mounted switch 10AX – 250V IP20 Valena Life
Press-in screw WEFHS
Contactor AF30
Sound-proofing component Instal
Circuit board support TRMDLSP1