Tapping screw pan head ISO 14585-C
Tapping screw, pan head, ISO 14585-C, TX, zinc-plated steel, type C
ISO 14585C (7981) TX20 ZN 3,9x9,5
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Datasheets(X)
 | |
Nominal diameter (d) | 3.9 mm |
Length (l) | 9.5 mm |
Head diameter (d) | 7.5 mm |
Head height (k) | 2.8 mm |
Last viewed
Mounting/insulation plate Ebisol
Wall bracket VK hot dip galvanised, Meka
Equipotential bonding busbar housing PMR576
Installation conductor H05V2-K MKJ 90
Step light automatic ELPA
Floodlight Floodlight PFM, IP65
Circuit breaker
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Mount cabinet Nedbox, surface
Through standoff WESO