Tapping screw Countersunk head ISO 14586-C
Tapping screw, countersunk head, ISO 14586-C, TX, zinc-plated steel, type C
ISO 14586-C TX6 ZN 2,2X4,5
Art.-no.
420212245
EAN 6438190803561
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 2.2 mm |
Length | 4.5 mm |
Head diameter | 4.3 mm |
Head height | 1.3 mm |
Last viewed
Slotted screw pan head DIN 7985
Surface-mounted frame 40/85 Impressivo
Hexagon socket screw, flat round head
Hexagon screw, full thread
Terminal block ZS10 GNYE SNK series
Angle compression lug PKK, 90° Ouneva
Through standoff WESO
Circuit board support TRLCBS
Cylindrical pin, unhardened
Installation conductor H05V2-K MKJ 90