Tapping screw hexagon head ISO 1479-C
Tapping screw, hexagon head, ISO 1479-C, zinc-plated steel, type C
ISO 1479-C A2K 5,5X19
Art.-no.
0114025519
EAN 6438190790885
-
Show availability at another Center
In order to check the stock in a Würth Elektro branch, please log in.
If you have any questions, please call our service hotline at +358 10 308 4700.
Do you want to register as an Online Shop user? Please go to the registration page.
Exclusively for trade customers
With registration you can access the Würth Elektro online shop selection.
When screwing in pre-drilled holes, tapping screws remove material when biting into the fastening material, rolling a thread.
Types
- Type C: thread and cone tip
- Type F: thread and flat tip
- Type R: thread and rounded tip
Product information
Datasheets(X)
 | |
Nominal diameter | 5.5 mm |
Length | 19 mm |
Form | C |
Material | Steel |
Surface | Zinc plated |
External drive | WS8 |
Last viewed
Cable clamp CH Instal
Plastic rivet black TRSR
Base 221-Inline with drainage system Wago
Bollard IP65 Pave Pillar Top Deco IV
Wall/middle bracket KTS - K 12 hot-dip galvanised, OBO
Closet IP66, Fe Spacial S3D
Circuit breaker Acti 9 iC60N
Circuit board support TRMSP
Lighting rail cover CS3, Unipro
Defrosting cable Frostvakt 25