Hexagon screw, partial thread
ISO 4014, steel 8.8, hot-dip galvanised
ISO 4014 8.8 HDG M16X200
With registration you can access the Würth Elektro online shop selection.
- Manufactured with a thread undersize in tolerance class 6AZ (thread play) before coating (DIN EN ISO 10684).
- Bolt meets ISO standard requirements after hot-dip galvanising
- The bolts must not be used with nuts that have oversize threads. Failure to comply may cause screw-in issues and connection failure
ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions expanded | Width across flats changed for M10, M12, M14, and M22.
Datasheets(X)
 | |
Notice | ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions expanded | Width across flats changed for M10, M12, M14, and M22. |
Last viewed
Press-in pin WETP
Helawrap – split spiral binding
Fork wire terminal DIN 46237 insulated PA
Hexagon socket screw, cylinder head
Flush-mounted switch IP21 Exxact
Lock WINSTA MIDI
Heat shrink hose TFN31
Washer, flat, for hexagon screws and nuts
Vehicle protecting tube PAER
Surface-mounted luminaire IP65 Surface Compact