Hexagon screw, partial thread
ISO 4014, steel 8.8, hot-dip galvanised
ISO 4014 8.8 HDG M20X320
With registration you can access the Würth Elektro online shop selection.
- Manufactured with a thread undersize in tolerance class 6AZ (thread play) before coating (DIN EN ISO 10684).
- Bolt meets ISO standard requirements after hot-dip galvanising
- The bolts must not be used with nuts that have oversize threads. Failure to comply may cause screw-in issues and connection failure
ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions expanded | Width across flats changed for M10, M12, M14, and M22.
Datasheets(X)
 | |
Notice | ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions expanded | Width across flats changed for M10, M12, M14, and M22. |
Last viewed
Surface mounting frame downlight Downlight Slim DN
Charging station load management control unit EVlink Home Peak Controller 3-phase
Vertical bend KSVI hot dip galvanised, Meka
Hexagon socket screw, cylinder head
Slotted screw cylinder head DIN 84
Office luminaire Linear IndiviLED Direct
Flange bolt, hexagon head
Rotary dimmer 315VA RC UPK, flush Exxact
Surface-mounted junction box Red Range i 12 IP55, plastic
Wing repair washer