Set screw, hex socket, cone point
ISO 4027, stainless steel A2 21H, uncoated
ISO 4027 21H A2 M10X25
With registration you can access the Würth Elektro online shop selection.
The hardness class 21H is equivalent to hardness 210 HV
Standard tip angle is 90°, but very short lengths have 120-degree angles.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4027 replaces DIN 914 | There are some consistencies | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M10 |
Length (l) | 25 mm |
Tip diameter (d) | 2.5 mm |
Internal drive (s) | HS5 |
Angle of the tip | 90 Degree |
Standards | ISO 4027 |
Material | Stainless steel A2 |
Surface | Plain |
Hardness category | 21H |
Drive type | Hexagon socket |
Thread form | Standard metric thread |
Shape of tip | Tip |
RoHS-compliant | Yes |
Last viewed
Circuit board support TRMSCBST
Wiring duct ECS
Taptite DIN 7500-C, cylinder head, PZ, thread-rolling screw
Blind rivet domed head open
Machine screw round pan head ISO 7045
Hexagon screw, countersunk head
Circuit board support TRDLSP3
End plate 2002 series, TOPJOB®S
G-Tubular glass fuse, fast (F) 6.3X32 mm
Set screw