Set screw, hex socket, cup point
ISO 4029 stainless steel A2 21H, uncoated
ISO 4029 21H A2 M8X8
With registration you can access the Würth Elektro online shop selection.
The hardness class 21H is equivalent to hardness 210 HV
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4029 replaces DIN 916 | There are some consistencies | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M8 |
Length (l) | 8 mm |
Ring cutter diameter (d) | 5 mm |
Internal drive (s) | HS4 |
Standards | ISO 4029 |
Material | Stainless steel A2 |
Surface | Plain |
Hardness category | 21H |
Drive type | Hexagon socket |
Shape of tip | Cup point |
RoHS-compliant | Yes |
Last viewed
Cable tie mini blind natural TRWSBH
Circuit breaker
Corrugated conduit bend JMKL HF
Circuit board support TRRLCBSR
Wing repair washer, fender washer, round hole, primarily for wood substrates
Earthing connector Instal
Installation conduit PPU AL
Wall bracket VKF acid-resisting steel, Meka
Contactor AF38
Wall bracket adjustment plate AL Instal