Set screw, hex socket, cup point
ISO 4029, acid-resisting steel A4, 21H, uncoated
ISO 4029 21H A4 M8X20
With registration you can access the Würth Elektro online shop selection.
The hardness class 21H is equivalent to hardness 210 HV
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
ISO 4029 replaces DIN 916 | There are some consistencies | Nominal diameters for M1.4, M1.8, M14, M18, and M22 are removed | Hardness classes for stainless steels introduced.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M8 |
Length (l) | 20 mm |
Ring cutter diameter (d) | 5 mm |
Internal drive (s) | HS4 |
Standards | ISO 4029 |
Material | Stainless steel A4 |
Surface | Plain |
Hardness category | 21H |
Drive type | Hexagon socket |
Shape of tip | Cup point |
RoHS-compliant | Yes |
Last viewed
Lighting rail T33, Unipro
Wall bracket VK hot dip galvanised, Meka
Battery cable HI-FLEX
Cable routing conduit plastic, Inform
Starter pack Valena Life with Netatmo
Circuit breaker
Joint connector KSF-NL hot dip galvanised, Meka
Safety switch Legrand
Cable routing conduit with two accessory holes plastic, Inform
Flush-mounted utility outlet corner, IP67