Spring pin / tube pin – grooved, for heavy use
ISO 8752, spring steel
ISO 8752 ST 20X95
With registration you can access the Würth Elektro online shop selection.
- Used to attach pieces similarly to grooved cylinder pins
- Can be used as screw sleeves in applications exposed to significant shear forces
- Less strain on bolts and screws, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared to the nominal diameter guarantees a secure, firm fit
- Thanks to the tapered end, the component is easy to insert into the hole
- Pins can be removed again without damage occurring
Hole diameter corresponds to nominal diameter (tolerance 12 H).
Can be stored in the ORSY® system
 | |
Nominal diameter (d) | 20 mm |
Length (l) | 95 mm |
Chamfer length (a) | 3.0 mm |
Standards | ISO 8752 |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Notice | Hole diameter corresponds to nominal diameter (tolerance 12 H). |
Datasheets(X)
Last viewed
Flange bolt, hexagon head, lock toothing
Washer, flat, no chamfer
Trellis
Charging station load management control unit EVlink Home Peak Controller 1-phase
Cable clamp CCA zinc plated, Meka
Downlight FTLight Luce square surface, IP44
Lighting rail adapter A100, Unipro
Flush-mounted switch IP21 Exxact
Dual push button Osmoz
Illuminated releasable push button Compact