Main switch DX3
ISOLATING SWITCH 1-P. 100A 250V LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
1-pole main switch, double switch contactors. Can be equipped with one DX3 latching relay auxiliary contactor
Version as main switch | Yes |
Version as maintenance-/service switch | No |
Version as safety switch | Yes |
Version as emergency stop installation | No |
Max. rated operation voltage Ue AC | 250 V |
Rated permanent current Iu | 100 A |
Conditioned rated short-circuit current Iq | 4.5 kA |
Number of poles | 1 |
Motor drive optional | No |
Motor drive integrated | No |
Device construction | Built-in device fixed built-in technique |
Suitable for floor mounting | No |
Suitable for front mounting 4-hole | No |
Suitable for front mounting centre | No |
Suitable for distribution board installation | Yes |
Suitable for intermediate mounting | No |
Type of control element | Toggle |
Interlockable | Yes |
Type of electrical connection of main circuit | Screw connection |
Degree of protection (IP), front side | IP20 |
Brand | LEGRAND |
Datasheets(X)
Last viewed
Spiral binding, cable protector, standard
Safety switch OTP
Alarm contactor with short-circuit alarm MS
Mounting plate Cubo O/C
WÜPOFAST®, blue passivated Chipboard screw
Staples for manual and hammer staplers
Wing repair washer, large outer diameter
Hexagon socket screw, flat cylinder head
Auxiliary contactor block CTX22
Hexagon socket screw, flat round head