Main switch DX3
ISOLATING SWITCH 1-P. 40A 250V LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
1-pole main switch, double switch contactors. Can be equipped with one DX3 latching relay auxiliary contactor
Datasheets(X)
Version as main switch | Yes |
Version as maintenance-/service switch | No |
Version as safety switch | Yes |
Version as emergency stop installation | No |
Max. rated operation voltage Ue AC | 250 V |
Rated permanent current Iu | 40 A |
Conditioned rated short-circuit current Iq | 4.5 kA |
Number of poles | 1 |
Motor drive optional | No |
Motor drive integrated | No |
Device construction | Built-in device fixed built-in technique |
Suitable for floor mounting | No |
Suitable for front mounting 4-hole | No |
Suitable for front mounting centre | No |
Suitable for distribution board installation | Yes |
Suitable for intermediate mounting | No |
Type of control element | Toggle |
Interlockable | Yes |
Type of electrical connection of main circuit | Screw connection |
Degree of protection (IP), front side | IP20 |
Brand | LEGRAND |
Last viewed
Lighting rail T33, Unipro
Slotted screw cylinder head DIN 84
Rivet nut
Wire end ferrule insulated Coiled
Cable channel PVC, cut-off groove, Legrand
Corner component KS90 acid-resisting steel, Meka
Bracket KKF acid-resisting steel, Meka
Film junction box Red Range
Taptite DIN 7500-M, countersunk head, thread rolling
Weak current cable RKUB