Main switch DX3
ISOLATING SWITCH 3-P. 20A 250V LEG
LEGRAND
With registration you can access the Würth Elektro online shop selection.
3-pole main switch, double switch contactors. Can be equipped with one DX3 latching relay auxiliary contactor
Datasheets(X)
Version as main switch | Yes |
Version as maintenance-/service switch | No |
Version as safety switch | Yes |
Version as emergency stop installation | No |
Max. rated operation voltage Ue AC | 400 V |
Rated permanent current Iu | 20 A |
Conditioned rated short-circuit current Iq | 4.5 kA |
Number of poles | 3 |
Motor drive optional | No |
Motor drive integrated | No |
Device construction | Built-in device fixed built-in technique |
Suitable for floor mounting | No |
Suitable for front mounting 4-hole | No |
Suitable for front mounting centre | No |
Suitable for distribution board installation | Yes |
Suitable for intermediate mounting | No |
Type of control element | Toggle |
Interlockable | Yes |
Type of electrical connection of main circuit | Screw connection |
Degree of protection (IP), front side | IP20 |
Last viewed
Cover plate 87 mm Exxact
Cover plate 85 mm Impressivo
Straight adapter MPCB MPX3
Wing repair washer, large outer diameter
Hexagon screw, full thread
Heat shrink hose with adhesive: FRG8003
Wing repair washer, fender washer, round hole, primarily for wood substrates
Adapter 1-pt/2-pt Impressivo
Mounting/insulation plate Ebisol
Vehicle protecting tube POLYFLEX PA6 HB