Surface-mounted junction box A VBS IP55, plastic
JUNCTION BOX A 18 HF RW PE IP55 2,5MM2
OBO BETTERMANN
With registration you can access the Würth Elektro online shop selection.
These indoor installation junction boxes are made of halogen-free, self-extinguishing thermoplastic. Depending on the conductor diameter used, the junction boxes have a maximum conductor and connector allowance. This stops above-maximum temperatures from developing. Plastic junction boxes normally include a table where the corresponding reference values are printed.
Datasheets(X)
Max. conductor cross section | 2.5 mm² |
Equipped with | None |
Shape | Square |
Mounting method | Wall-/ceiling mounting |
Inlet from the rear | No |
Length | 125 mm |
Width | 100 mm |
Depth | 40 mm |
Tackable | No |
Number of inlets | 18 |
Type of housing feed-through | Preembossing |
Material | Plastic |
Halogen free | Yes |
Surface protection | Untreated |
Colour | White |
Degree of protection (IP) | IP55 |
Cover attachment | Snapped on |
Sealable | No |
Rated insulation voltage Ui | 400 V |
Circuit integrity | None |
With screening | No |
Weatherproof | No |
Explosion-tested version | No |
For Ex-zone gas | None |
For Ex-Zone dust | None |
E-number Finland | 1627136 |
Brand | OBO BETTERMANN |