Surface-mounted junction box AP9 IP65, plastic
JUNCTION BOX AP9R
ABB
With registration you can access the Würth Elektro online shop selection.
AP9 junction boxes (2.5 mm², 500 V, protection class IP 65) are rigid-frame boxes with fixed, soft insulating glands. There are 12 glands for cables up to Ø 17 mm and 2 in the base for cables up to Ø 19 mm. Box sealable if necessary. Installation temperature –25...+60 °C. Cable feed-through made with stripped conductor ends, for example. Cover opened with a screwdriver at the grooves and fastened by pressing. Cable clamps AS9, AS9.1, and AS9.3. are available for the junction box. Made of halogen-free materials (IEC/61249-2-21).
Datasheets(X)
Equipped with | None |
Shape | Square |
Mounting method | Universal |
Inlet from the rear | Yes |
Length | 86 mm |
Width | 86 mm |
Depth | 39 mm |
Number of inlets | 12 |
Type of housing feed-through | Seal membrane |
Material | Plastic |
Halogen free | Yes |
Surface protection | Untreated |
Colour | Red |
Degree of protection (IP) | IP55 |
Cover model | Blind cover |
Cover attachment | Snapped on |
Castable | No |
Sealable | No |
Rated insulation voltage Ui | 400 V |
Circuit integrity | None |
With screening | No |
Weatherproof | Yes |
Operating temperature | -15-60 °C |
Last viewed
Limit switch OsiSense
Charging station load management control unit EVlink Home Peak Controller 3-phase
Auxiliary contactor TeSys
Wiser door/window sensor Zigbee
Alarm contactor with short-circuit alarm MS
Series marking Power Cage Clamp
Wing repair washer, large outer diameter
Apparatus box with HF extension ring
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Thread-forming bushing WES