Film junction box VBS
JUNCTION BOX VBS T 160 KL IP66
OBO BETTERMANN
With registration you can access the Würth Elektro online shop selection.
Fully installed connectors have been lifted upwards and positioned
near the edges of the housing for easy lead-through and connection. Inside dimensions 176 x 135 x 67 mm.
- Equipped with a quatre-turn bracket, the cover is easy to open and close.
- You can leave the cover hanging from the check wire during installation.
- Inspections and measuring are easier to perform when the connection points are clearly visible.
- Tight, soft and detachable cable grommets (EVA; ethylene-vinyl acetate) on each side. Lead-in blanks on the base and condensation water drainage holes on each side.
- You can also use conduit or cable stubs instead of detachable cable grommets.
- UV-protected plastic housing, PP/GF polypropylene with fibreglass reinforcement, protection rating IP66, mechanical protection IK06 EN50102.
- The sturdy housing is made of halogen-free polypropylene and it does not contain fluorides, chlorides nor bromides.
- There are convenient alignment marks on each side of the housing, which makes installation easier.
- More connection points/holes for other base plates or devices on the base.
Datasheets(X)
Max. conductor cross section | 16 mm² |
Equipped with | Clamp |
Shape | Rectangular |
Mounting method | Wall-/ceiling mounting |
Inlet from the rear | Yes |
Length | 190 mm |
Width | 150 mm |
Depth | 77 mm |
Tackable | Yes |
Number of inlets | 12 |
Type of housing feed-through | Trimmable step membrane |
Material | Plastic |
Surface protection | Untreated |
Colour | Grey |
Degree of protection (IP) | IP66 |
Cover attachment | Screwed |
Sealable | Yes |
Rated insulation voltage Ui | 500 V |
Circuit integrity | None |
With screening | No |
Weatherproof | No |
Explosion-tested version | No |
For Ex-zone gas | None |
For Ex-Zone dust | None |