Low kalei nut
Zinc-plated steel
KALEI-NUT THIN ZP M10-1,8
With registration you can access the Würth Elektro online shop selection.
Kalei nuts are installed in drilled or pierced holes.
The strong slotting of the nut collar provides the connection with high torsion accuracy.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M10 |
External collar diameter (D) | 12.9 mm |
Height (H) | 5 mm |
Installation depth (h) | 1.8 mm |
External drive (E) | WS15 |
Min. material thickness (s) | 2 mm |
Material thickness | 2 mm |
Internal collar diameter (d2) | 12.5 mm |
Drill hole diameter | 12.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Centre plate radio/TV ELKO RS16
Residual current breaker with overcurrent ADA 30mA
Hexagon socket screw, cylinder head
Car conductor AJ
Electronic motor controller ELKO RS16
Constant voltage LED driver 24V DR Performance CV CV-DR-PFM
Wiser temperature and moisture meter Zigbee
Junction box 221 series WAGO
Car conductor AJ numbered