Kalei nut
zinc-plated steel
KALEI -NUT ZN M12-1,8
With registration you can access the Würth Elektro online shop selection.
Kalei nuts are installed in drilled or pierced holes.
The strong slotting of the nut collar provides the connection with high torsion accuracy.
Precisely crafted, KALEI nuts are suited for
automatic feeding.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M12 |
External collar diameter (D) | 14.85 mm |
Height (H) | 10 mm |
Installation depth (h) | 1.8 mm |
External drive (E) | WS17 |
Min. material thickness (s) | 2 mm |
Material thickness | 2 mm |
Internal collar diameter (d2) | 14.5 mm |
Drill hole diameter | 14.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Heater BETA-BT BETA-BT
Plastofast, pan head
Residual current device TX3
Circuit board support TRMSP
Centre plate 2xKeystone angled ELKO RS Nordic
Cable tie natural P CLIP TRUC
Thread-forming bushing WESP4
Alarm contactor with short-circuit alarm MS
Hexagon socket screw, cylinder head
Flush-mounted outlet IP44 Valena