Kalei nut
zinc-plated steel
KALEI-NUT ZN M3 0,9
With registration you can access the Würth Elektro online shop selection.
Kalei nuts are installed in drilled or pierced holes.
The strong slotting of the nut collar provides the connection with high torsion accuracy.
Precisely crafted, KALEI nuts are suited for
automatic feeding.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M3 |
External collar diameter (D) | 4.7 mm |
Height (H) | 3 mm |
Installation depth (h) | 0.9 mm |
External drive (E) | WS5.5 |
Min. material thickness (s) | 1 mm |
Material thickness | 1 mm |
Internal collar diameter (d2) | 4.5 mm |
Drill hole diameter | 4.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Circuit board support TRMDLSP3
Valena Allure with Netatmo group/turn button
Flush-mounted outlet with 2 x USB 2.4 A Valena Allure
Through standoff WESO
Nail clamp SC black
Coupling sleeve straight OBO
Through standoff WESO
Flush-mounted switch 10AX – 250V IP20 Valena Life
Auxiliary contactor block CTX22
Hexagon screw, full thread