Kalei nut
zinc-plated steel
KALEI-NUT ZN M4-0,9
With registration you can access the Würth Elektro online shop selection.
Kalei nuts are installed in drilled or pierced holes.
The strong slotting of the nut collar provides the connection with high torsion accuracy.
Precisely crafted, KALEI nuts are suited for
automatic feeding.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M4 |
External collar diameter (D) | 5.7 mm |
Height (H) | 3.2 mm |
Installation depth (h) | 0.9 mm |
External drive (E) | WS7 |
Min. material thickness (s) | 1 mm |
Material thickness | 1 mm |
Internal collar diameter (d2) | 5.5 mm |
Drill hole diameter | 5.5 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Circuit board support TRMDLSP3
Lever with lamp symbol Exxact
Surface-mounted RCD outlet IP21 Impressivo
Hexagon screw, full thread
Connector SSA hot dip galvanised, Meka
Electronic ballast CV-DR-PFM
Splice connector 222 series WAGO
Outlet body, flush IP20 Valena
Coupling accessory MINI GEL BOX
LED strip 24V IP00 Value RGB