Kalei nut
zinc-plated steel
KALEI-NUT ZN M6-1,8
With registration you can access the Würth Elektro online shop selection.
Kalei nuts are installed in drilled or pierced holes.
The strong slotting of the nut collar provides the connection with high torsion accuracy.
Precisely crafted, KALEI nuts are suited for
automatic feeding.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
External collar diameter (D) | 8.3 mm |
Height (H) | 5 mm |
Installation depth (h) | 1.8 mm |
External drive (E) | WS10 |
Min. material thickness (s) | 2 mm |
Material thickness | 2 mm |
Internal collar diameter (d2) | 8 mm |
Drill hole diameter | 8 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Lighting rail TC32F, Unipro
Plafond light with motion sensor Surface Bulk Head EM, IP65
3-phase conductor rail system MS
Enclosed industrial luminaire Damp Proof Classic, IP65
Cable gland cable feed through, polyamide
Plafond light with motion sensor Surface Bulk Head, IP65
Office luminaire Linear IndiviLED Direct
Flush-mounted switch IP21 Exxact
Motor protection switch TeSys GV2
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65