Spotlight Beam Pro
LAMP P45 840 500lm E27 OP
With registration you can access the Würth Elektro online shop selection.
Beam Pro is a spotlight made of aluminium. The luminaire’s material is of high quality and its finish is neat and tidy. The luminaire is installed on a single- (1P) or three-phase busbar (3P). The design of Beam Pro is elegant and timeless and it is suitable for a wide range of purposes. Suitable uses are public spaces, such as restaurants, cafes, hair salons and other small shops, as well as residential buildings.
Datasheets(X)
Outer diameter | 60 mm |
Adjustability | Rotating and swivelling |
No dim function | Yes |
Dimming DALI | No |
Dimming phase cut-on | No |
Type of wiring | Ending |
Height/depth | 98 mm |
Housing colour | White |
Suitable for clamp-mounting | No |
Suitable for traverse mounting | No |
With movement sensor | No |
Suitable for pedestal/floor mounting | No |
With light sensor | No |
Lamp type | LED exchangeable |
Suitable for low voltage cable system | No |
With light source | No |
Suitable for number of light sources | 1 |
Lamp holder | GU10 |
Housing material | Aluminium |
Surface protection | Powder coating |
Suitable for ceiling mounting | Yes |
Material cover | Other |
Surface brushed | No |
Voltage type | AC |
Nominal voltage | 220-240 V |
Type of control gear | Not required |
With control gear | No |
Exchangeable control gear | No |
Dimming 0-10 V | No |
Dimming 1-10 V | No |
Dimming DALI-2 | No |
Dimming DMX | No |
Dimming DSI | No |
Dimming potentiometer (integrated) | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Dimming with push-button | No |
Reflector | None |
Light distributor | None |
Light sharing | Symmetric |
Light outlet | Direct |
Constant light output (CLO) | No |
Degree of protection (IP) | IP20 |
Protection class | II |
Rated ambient temperature according to IEC 62722-2-1 | 0-25 °C |
Suitable for lamp power | 1-7 W |
Suitable for wall mounting | No |
Suitable for built-in mounting | No |
E-number Finland | 4146918 |