Rotary LED dimmer 0-370W, flush Exxact
LED ROTARY DIMMER 0-370W WT
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
The Exxact LED dimmer is suitable for most LED bulbs, incandescent bulbs and halogens with an electrical ballast.
Particularly low minimum level (0.4ms). Easy installation and minimum level adjustment.
Can be installed with or without neutral - the best adjustment result is obtained by using neutral.
Minimum load 0W (with neutral) and 3W (without neutral), maximum LED load 200W.
Datasheets(X)
Method of operation | Turn/push button |
App control via Bluetooth | No |
Dimming phase cut-on | No |
Dimming phase cut-off | Yes |
Serial dimmer | No |
Type of load | Capacitive load |
Substation input | Yes |
Light value memory | Yes |
Applicable with button | Yes |
Applicable with movement sensor | No |
Applicable with presence indicator | No |
Applicable with time switch/timer | No |
Applicable with transmission button | No |
Applicable with infrared button | No |
Type of fastening | Mounting with claw and screw |
Material | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Glossy |
Colour | White |
RAL-number (similar) | 9003 |
Transparent | No |
Suitable for degree of protection (IP) | IP20 |
Impact strength | IK02 |
Nominal voltage | 230-230 V |
Frequency | 50-60 Hz |
Connection type | Screwed terminal |
Core cross section | 1.5-2.5 mm² |
Device width | 71 mm |
Device height | 71 mm |
Device depth | 29 mm |
Min. depth of built-in installation box | 46 mm |
E-number Finland | 2622137 |
Brand | SCHNEIDER ELECTRIC |
