Rotary dimmer LED Saga
LIGHT CONTROL KNOB 2-100VA LED SAGA
ABB
With registration you can access the Würth Elektro online shop selection.
SAGA low LED light controller, includes device and centre plate. The flush-mount depth of the LED light controller is 20 mm. The LED rotary knob controller is a 2-wire solution (N-wire is not needed). Either RL or RC operation can be selected from the controller. The power range of the controller is 2-100 VA for LED loads. 10-400 W for other loads (see installation instructions). Linear and low-noise adjustment is possible thanks to the MOSFET transistors. Short circuit and overload protection The basic brightness can be changed by adjusting the potentiometer in the upper right corner of the device (min adjustment). Use with AC is possible following the installation instructions.
Datasheets(X)
Method of operation | Turn/push button |
Number of modules (module system) | 0 |
App control via Bluetooth | No |
Dimming phase cut-on | Yes |
Dimming phase cut-off | Yes |
Serial dimmer | No |
Type of load | Universal and LED Retrofit |
Substation input | Yes |
Light value memory | Yes |
Applicable with button | Yes |
Applicable with movement sensor | No |
Applicable with presence indicator | No |
Applicable with time switch/timer | No |
Applicable with transmission button | No |
Applicable with infrared button | No |
Type of fastening | Screw mounting |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Glossy |
Colour | White |
Transparent | No |
Suitable for degree of protection (IP) | IP20 |
Impact strength | IK00 |
Nominal voltage | 207-253 V |
Frequency | 50-60 Hz |
Control voltage | 220-240 V |
Connection type | Screwed terminal |
Device width | 71 mm |
Device height | 71 mm |
Device depth | 45 mm |
Min. depth of built-in installation box | 20 mm |
Compatible with Apple HomeKit | No |
Compatible with Google Assistant | No |
Compatible with Amazon Alexa | No |
IFTTT support available | No |