Rotary dimmer Impressivo
LIGHT CONTROL KNOB 2-400W/VA UPK WT IMP
ABB
With registration you can access the Würth Elektro online shop selection.
Low Impressivo LED rotary dimmer with centre plate, flush-mounted depth is 20 mm.
The LED rotary knob controller is a 2-wire solution (N-wire is not needed). Either RL or RC operation can be selected from the controller. The power range of the controller is 2-100 VA for LED loads, 10-400 W for other loads. Linear and low-noise adjustment is possible thanks to the MOSFET transistors.
Electronic short circuit and overload protection. The basic brightness can be changed by adjusting the potentiometer in the upper right corner of the device (min adjustment).
Datasheets(X)
Last viewed
Cylindrical pin, hardened
Hexagon socket screw, flat round head
Floodlight IP65 Spot Line
Sound-proofing component Instal
Rubber cable NSGAFÖU 1.8/3 kV
Hexagon screw, full thread
Installation cable MMJ
DIN installation bar Spelsberg
Rectangular flexible slotted cable trunking
Wall luminaire IP65 Circo DIM