Dimmer flex LED Saga
LIGHT CONTROLLER FLEX LED 3-100W SAGA
ABB
With registration you can access the Würth Elektro online shop selection.
SAGA button dimmer for adjusting LED lights. RL or RC control mode can be selected from the controller. Connection with two wires. A neutral conductor can be connected if desired, <10W/VA is recommended for small loads. Power range is 3 - 100VA retrofit LED. 3-240W loads other than LED. Linear and quiet adjustment. The use of mixed loads is allowed. Electronic short circuit and overload protection. Basic brightness setting with a separate potentiometer. Light level memory. Closing 230V push buttons are used as side controls (functions: on, off and adjustment).
Datasheets(X)
Method of operation | Push button |
Number of modules (module system) | 0 |
App control via Bluetooth | No |
Dimming phase cut-on | Yes |
Dimming phase cut-off | Yes |
Serial dimmer | No |
Type of load | Universal and LED Retrofit |
Substation input | Yes |
Light value memory | Yes |
Applicable with button | Yes |
Applicable with movement sensor | Yes |
Applicable with presence indicator | Yes |
Applicable with time switch/timer | Yes |
Applicable with transmission button | Yes |
Applicable with infrared button | No |
Mounting method | Built-in |
Type of fastening | Mounting with claw and screw |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Glossy |
Colour | Black |
RAL-number (similar) | 9003 |
Transparent | No |
Suitable for degree of protection (IP) | IP20 |
Impact strength | IK00 |
Nominal voltage | 207-253 V |
Frequency | 50-60 Hz |
Control voltage | 230-230 V |
Connection type | Screwed terminal |
Device width | 71 mm |
Device height | 71 mm |
Device depth | 46.35 mm |
Min. depth of built-in installation box | 32 mm |
Compatible with Apple HomeKit | No |
Compatible with Google Assistant | No |
Compatible with Amazon Alexa | No |
IFTTT support available | No |