Lighting outlet Surface AKK2
LIGHTING OUTLET AKK2P
ABB
With registration you can access the Würth Elektro online shop selection.
Lighting outlet cover AKK2 is a two-poled 0-class cover which is suited to be installed directly on the ceiling's surface or on top of the junction box. Branch circuit may be extended by 2,5 mm² (-0-). At maximum a 6 A /250 V light may be fixed to the cover. Hanging hook’s maximum load is 15 kg.
Number of units | 1 |
Number of socket outlets switchable | 1 |
Imprint/indication | Other |
Connection type | Other |
With hinged lid | No |
With enhanced contact protection | No |
Colour | White |
Transparent | No |
Lockable | No |
Eject-mechanism | No |
Insulated mounting | No |
With function lighting | No |
With orientation lighting | No |
Over voltage protection | No |
Fault current protection | No |
With miniature fuse | No |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
With on/off switch | No |
With loop through function | No |
Rotated central insert | No |
Nominal current | 6 A |
Nominal voltage | 250 V |
Frequency | 50-60 Hz |
Suitable for degree of protection (IP) | IP20 |
Device depth | 17 mm |
E-number Finland | 1152510 |
Brand | ABB |
Datasheets(X)
Last viewed
Circuit board support TRPST
Automotive cable, single conductor, double insulated FLRYY
Connection cable H05VV-F MSK
Circuit board support TRMSPM
Thermal relay RTX3 100
Spacer screw SIUL ZN
Floor heater cable Cable Kit 200
Silicone cable SIHF
Cable trunking, flat angle DLP-S
Equipotential outlet 2-part Jussi