Lock washer, Schnorr washer S
Plain steel ST
LOCK WASHER S ST M8X13X0,7
With registration you can access the Würth Elektro online shop selection.
The Belleville washer form features angled teeth to create an optimum and simultaneous friction-fit and form-fit connection.
It makes sense in many cases—primarily when using short screws and loads which are vertical to the screw axis—to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. The lock washers prevent connection loosening by increasing the pre-tensile force.
Datasheets(X)
 | |
Suitable for screw thread | M8 |
Internal diameter (d) | 8.4 mm |
Outer diameter (d) | 13 mm |
Height (h) | 1.4 mm |
Thickness (s) | 0.7 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Form | S |
Notice | It makes sense in many cases—primarily when using short screws and loads which are vertical to the screw axis—to prevent the connection loosening by using lock washers to supplement the pre-tensioning force. The lock washers prevent connection loosening by increasing the pre-tensile force. |
Last viewed
Cable trunk adhesive tape mounting Ultra mini strip Exxact
Combination thermostat EB-THERM 205
Flush-mounted outlet with cover plate IP21 Exxact
Power cable CU MCMK Prysmian
Washer for cylinder head screws
Auxiliary contactor TeSys GVAN11
Circuit breaker
Defrosting cable Ebeco Frostvakt 10
3-phase conductor rail system MS
Terminal block 2000 series 3 conductor TOPJOB® S