Motion detector Indoor 180-R Luxomat
LUXOMAT INDOOR 180-R 180 2300W IP20
NYLUND
With registration you can access the Würth Elektro online shop selection.
Luxomat Indoor 180-R
Wall mounted Luxomat motion detector 180°.
- Detection area 180°, max 10 m.
- Installation to a mounting box.
- Recommended mounting height 1,1 - 2,2 m.
- Relay, max load 10A, 2300W, cos=1.
- Delay: Impulse or 15 s - 16 min.
- Acoustic sensor independently adjustable. The acoustic sensor activates only after the detector has detected movement. Noise automatically extends follow-up time. If the lights have turned off, the lights may be turned on again with noise, within 7 seconds after the lights have turned off.
- Max 8 detectors can be installed in parallel.
- Supplied with a RAL 9010 white coloured centre plate
Datasheets(X)
Model | Movement sensor |
Sensor type | Passive infrared |
HVAC-control | No |
Animal zone | Yes |
Creep-under protection | No |
Networkable | Yes |
Optimum mounting height | 1.5 m |
Staircase light controller | Yes |
Bridging switch | No |
Max. reach sideways | 10 m |
Max. reach frontally | 3 |
Diameter reach on floor | 10 m |
Suitable for wireless transmission | No |
Remote operation | No |
Response value sensitivity adjustable | Yes |
Response value luminosity adjustable | Yes |
With signal unit | Yes |
Teach-function for response value luminosity | Yes |
Dim function with dimmer basic element | No |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
RAL-number (similar) | 9010 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 15 s |
Max. duty cycle | 16 min |
Detection angle horizontal | 0-180 ° |
Response value luminosity | 10-2000 lx |
Max. switching power | 2300 W |
Suitable for C-load | Yes |
Temperature | -25-50 °C |
Control current | 2 |
