Motion detector LC 200 Luxomat
LUXOMAT LC 200
With registration you can access the Würth Elektro online shop selection.
For controlling lighting at outdoors, shelters and entrances. Easy and effortless installation thanks to the plug-in connectors. With the stepless adjustment of the twilight switch, switching on the lighting, even if there is not enough natural light, is possible. Twilight switch can also be disabled when the lighting are switched on always by motion.
Datasheets(X)
Model | Movement sensor |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Staircase light controller | No |
Bridging switch | No |
Max. reach sideways | 5 m |
Max. reach frontally | 6 m |
Diameter reach on floor | 10 m |
Suitable for wireless transmission | No |
Remote operation | No |
With remote control | No |
Response value luminosity adjustable | Yes |
With signal unit | Yes |
Teach-function for response value luminosity | No |
Dim function with dimmer basic element | No |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP44 |
Voltage type | AC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 4 s |
Detection angle horizontal | 200-200 ° |
Response value luminosity | 2-2500 lx |
Max. switching power | 2300 W |
Suitable for C-load | Yes |
Temperature | -25-50 °C |
E-number Finland | 2603355 |
