Occupancy detector PD2 Luxomat
LUXOMAT PD2-M-1C-FP
NYLUND
With registration you can access the Würth Elektro online shop selection.
Infrared occupancy detector for accurate occupancy detection and reliable lighting control. This version is easy to install into different roof structures, installation box and to surface or flush mount without additional accessories. The detector is ready for operation with factory settings without programming.
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Forced switch off | Yes |
Creep-under protection | Yes |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Bridging switch | No |
Max. reach sideways | 5 m |
Max. reach frontally | 3 m |
Diameter reach on floor | 10 m |
Suitable for wireless transmission | No |
Remote operation | Yes |
With remote control | Yes |
Response value sensitivity adjustable | Yes |
Response value luminosity adjustable | Yes |
With signal unit | Yes |
Teach-function for response value luminosity | Yes |
Dim function with dimmer basic element | No |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP20 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 15 s |
Max. duty cycle | 30 min |
Detection angle horizontal | 0-360 ° |
Response value luminosity | 10-2000 lx |
Max. switching power | 2300 W |
Suitable for C-load | Yes |
Temperature | -25-50 °C |
Number of switching zones | 1 |
Max. starting current | 800 A |
Control current | 10 |
E-number Finland | 2603229 |
Brand | NYLUND |