Occupancy detector PD2-S-AP Luxomat
LUXOMAT PD2-S-AP
NYLUND
With registration you can access the Würth Elektro online shop selection.
PD2-Slave detectors can be used to expand the monitoring area of one master detector to cover the entire lighting area. Suitable to be used with occupancy detectors intended for ON/OFF and DALI lighting control.
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
Creep-under protection | Yes |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Bridging switch | No |
Max. reach sideways | 5 m |
Max. reach frontally | 6 m |
Diameter reach on floor | 10 m |
Suitable for wireless transmission | No |
Response value sensitivity adjustable | No |
Response value luminosity adjustable | No |
With signal unit | Yes |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP20 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 110 V |
Suitable for C-load | Yes |
Temperature | -25-50 °C |
Control current | 2 |
E-number Finland | 2603363 |
Brand | NYLUND |
Last viewed
Grooved nut for clamping sleeve
Perimeter trunking, plastic TEK Thorsman
Cable tie lockable natural TRLWS 2A
Open industrial luminaire IP23 Low Bay FLEX
CABLE MARKER STRIP 4.0-6.0 MM2 WIC3
Feather key, high profile
Wall bracket VK2 hot dip galvanised, Meka
EMC LOCKNUT MS PG EMC, brass nickel plated
Motor protection switch MS116
Heater mat Thermoflex Kit 500