Occupancy detector PD2-S-FP Luxomat
LUXOMAT PD2-S-FP
NYLUND
With registration you can access the Würth Elektro online shop selection.
PD2-Slave detectors can be used to expand the monitoring area of one master detector to cover the entire lighting area. Suitable to be used with occupancy detectors intended for ON/OFF and DALI lighting control.
Datasheets(X)
Model | Movement sensor |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
Creep-under protection | Yes |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Bridging switch | No |
Max. reach sideways | 5 m |
Max. reach frontally | 6 m |
Diameter reach on floor | 10 m |
Suitable for wireless transmission | No |
Response value sensitivity adjustable | No |
Response value luminosity adjustable | No |
With signal unit | Yes |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP20 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Temperature | -25-50 °C |
Control current | 2 |
E-number Finland | 2603364 |
Brand | NYLUND |
Last viewed
Electrical wire H07V2-K MULTINORM UL1015
Hexagon nut
Shim
Cover plate 87 mm with adapter Exxact
Damp proof industrial luminaire Damp Proof Classic Emergency, IP65
Fork wire terminal with long sleeve insulated PA
Heat shrink hose TF24
Concrete curing cable BHS
Round flexible cable trunking HelaDuct Flex
Motor protection switch MS116