Occupancy detector PD4-M-1C-C Luxomat
LUXOMAT PD4-M-1C-C-AP
NYLUND
With registration you can access the Würth Elektro online shop selection.
The narrow and long monitoring area is ideal for monitoring long corridors. The corridor optimized monitoring area increases the distance between detectors by keeping the operational reliability at the maximum.
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Forced switch off | Yes |
Creep-under protection | Yes |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Bridging switch | No |
Max. reach sideways | 20 m |
Max. reach frontally | 10 m |
Diameter reach on floor | 40 m |
Suitable for wireless transmission | No |
Remote operation | Yes |
With remote control | Yes |
Response value sensitivity adjustable | Yes |
Response value luminosity adjustable | Yes |
Teach-function for response value luminosity | Yes |
Dim function with dimmer basic element | No |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP54 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 15 s |
Max. duty cycle | 30 min |
Detection angle horizontal | 0-360 ° |
Response value luminosity | 10-2000 lx |
Max. switching power | 2300 W |
Suitable for C-load | Yes |
Temperature | -25-50 °C |
Number of switching zones | 1 |
Max. starting current | 800 A |
Control current | 10 |
E-number Finland | 2603233 |
Brand | NYLUND |