Occupancy detector PD4-M-2C Luxomat
LUXOMAT PD4-M-AP
NYLUND
With registration you can access the Würth Elektro online shop selection.
An infrared occupancy detector equipped with two relay outputs for accurate occupancy detection and reliable lighting control. This version is easy to install into different roof structures, installation box and to surface or flush mount without additional accessories. The detector is ready for operation with factory settings without programming. An integrated relay can control one lighting group and ventilation machine directly based on presence and luminous flux. Push button can be used to control the lighting when required.
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | Yes |
Forced switch off | Yes |
Animal zone | No |
Creep-under protection | Yes |
Networkable | Yes |
Scan angle | 360 ° |
Optimum mounting height | 2.5 m |
Bridging switch | No |
Max. reach sideways | 12 m |
Max. reach frontally | 8 m |
Diameter reach on floor | 24 m |
Suitable for wireless transmission | No |
Remote operation | Yes |
With remote control | Yes |
Response value sensitivity adjustable | Yes |
Response value luminosity adjustable | Yes |
With signal unit | Yes |
Teach-function for response value luminosity | Yes |
Dim function with dimmer basic element | No |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP54 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 15 s |
Max. duty cycle | 30 min |
Response value luminosity | 10-2000 lx |
Max. switching power | 2300 W |
Suitable for C-load | Yes |
Temperature | -25-50 °C |
Control current | 2 |
E-number Finland | 2603366 |
Brand | NYLUND |
