Occupancy detector PD4-M-2C Luxomat
LUXOMAT PD4-M-FP
NYLUND
With registration you can access the Würth Elektro online shop selection.
An infrared occupancy detector equipped with two relay outputs for accurate occupancy detection and reliable lighting control. This version is easy to install into different roof structures, installation box and to surface or flush mount without additional accessories. The detector is ready for operation with factory settings without programming. An integrated relay can control one lighting group and ventilation machine directly based on presence and luminous flux. Push button can be used to control the lighting when required.
Datasheets(X)
Model | Presence detector |
HVAC-control | Yes |
Forced switch off | Yes |
Creep-under protection | Yes |
Max. reach sideways | 12 m |
Max. reach frontally | 8 m |
Diameter reach on floor | 24 m |
Remote operation | Yes |
Response value sensitivity adjustable | Yes |
Response value luminosity adjustable | Yes |
Teach-function for response value luminosity | Yes |
Mounting method | Other |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 15 s |
Max. duty cycle | 30 min |
Response value luminosity | 10-2000 lx |
Temperature | -25-50 °C |
Control current | 2 |
Substation input | Yes |
E-number Finland | 2603362 |
Brand | NYLUND |
Last viewed
Flush-mounted outlet IP44 Valena
Open industrial luminaire IP23 Low Bay FLEX
Switchgear panel IP2XC Pikku-Waltteri, surface
Downlight Comfort Twist Quick ISO 6-pack, IP44
Illuminated releasable push button Compact
Lighting rail T-component CTA3C, Unipro
Spacer screw SIUL ZN
Circuit breaker
Wall bracket VK hot dip galvanised, Meka
Pin contact male, 1.5 mm