Occupancy detector PD4-S-AP Luxomat
LUXOMAT PD4-S-AP
NYLUND
With registration you can access the Würth Elektro online shop selection.
PD4-Slave detectors can be used to monitor the entire lighting area. Suitable to be used with occupancy detectors intended for ON/OFF and DALI lighting control.
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Creep-under protection | Yes |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Max. reach sideways | 12 m |
Max. reach frontally | 8 m |
Diameter reach on floor | 24 m |
Suitable for wireless transmission | No |
With signal unit | Yes |
Dim function with dimmer basic element | No |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP54 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Temperature | -25-50 °C |
Control current | 1 |
E-number Finland | 2603367 |
Brand | NYLUND |
Last viewed
End plate 261 series
Front cover EB-Therm 205 ABB Impress
Disconnect/test terminal block 2007 series TOPJOB® S
Thread-forming bushing WESP4
STOP PLUG MS PG, with O ring Brass nickel plated
Terminal block 2216 series with push-button 2 conductor GNYE TOPJOB® S
M-manifold for protective pipe
Set screw, hex socket, cup point
Compression lug PK Ouneva