Occupancy detector PD4-S-FP Luxomat
LUXOMAT PD4-S-FP
NYLUND
With registration you can access the Würth Elektro online shop selection.
PD4-Slave detectors can be used to monitor the entire lighting area. Suitable to be used with occupancy detectors intended for ON/OFF and DALI lighting control.
Datasheets(X)
Model | Presence detector |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
Creep-under protection | Yes |
Networkable | Yes |
Optimum mounting height | 2.5 m |
Max. reach sideways | 12 m |
Max. reach frontally | 8 m |
Diameter reach on floor | 24 m |
Suitable for wireless transmission | No |
With signal unit | Yes |
Dim function with dimmer basic element | No |
Mounting method | Other |
Material | Plastic |
Material quality | Other |
Halogen free | Yes |
Surface protection | Untreated |
Surface finishing | Matt |
Colour | White |
RAL-number (similar) | 9010 |
Degree of protection (IP) | IP20 |
Voltage type | AC/DC |
Frequency | 50-60 Hz |
Nominal voltage | 230 V |
Temperature | -25-50 °C |
Control current | 1 |
E-number Finland | 2603368 |
Brand | NYLUND |
Last viewed
Through standoff WESO
Downpipe Instal
Hexagon screw, full thread
Motor protection switch TeSys GV2
Cover plate 85 mm Impressivo
Flush-mounted outlet with centre plate IP20,IP21 ELKO RS16
Motor protection switch MS132
Terminal block 2116 series with lever 3 conductor TOPJOB® S
Circuit breaker
Cover plate 90 mm glass Exxact