Stair light timer switch Luxomat SCT1
LUXOMAT STAIR CASE TIMER SCT 1
NYLUND
With registration you can access the Würth Elektro online shop selection.
Stair light timer switch Luxomat SCT1:
- Stair light timer switch designed for use with Indoor 180-SC or for pushbuttons
- Maximum of ten indoor 180-SC detectors can be connected behind one SCT 1 stair light timer switch
- DIN rail installation
- 2300 W cos φ = 1, 3 or 4-wire connection
- 100 mA power supply to the detectors
- Delay 30 s - 10 min. Manual switch for timer or constant light operation
Datasheets(X)
Function | Electronic with switching-off pre-warning |
Mounting method | DIN rail |
Width in number of modular spacings | 1 |
Control voltage 1 | 230-230 V |
Type of control voltage 1 | AC |
Frequency control voltage 1 | 50-50 Hz |
Control voltage 2 | 230-230 V |
Type of control voltage 2 | AC |
Frequency control voltage 2 | 50-50 Hz |
Rated switch current | 10 A |
Push button glow-lamp current | 100 mA |
Wiring system | 3 and 4 wire configuration |
Pre-warning of switching-off | Other |
Current surge function selectable | No |
Repetitive | Repetitive + continuous light + time extension |
Supply voltage | 230-230 V |
Voltage type (supply voltage) | AC |
Max. incandescent lamp load | 2300 W |
Max. load fluorescent lamp | 1000 VA |
Last viewed
Crimp sleeve WEBSO4
Circuit board support TRMDLSP3
Flush-mounted switch 10AX – 250V IP20 Valena Life
Downlight FTLight Luce round surface, IP44
Floodlight IP 65 Floodlight Compact
Lighting rail TC32F, Unipro
Slotted screw Pan head ISO 14583
Square nut, low profile
Installation terminal block 2005 series triple-deck TOPJOB® S
Vehicle cable (AJM) RKXB