Motor protection switch MS116
MANUAL MOTOR STARTER MS116-0.16
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 0.1-0.16 A |
Adjustment range undelayed short-circuit release | 2-2 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 0.03 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 100 kA |
Degree of protection (IP) | IP20 |
Height | 90 mm |
Width | 45 mm |
Depth | 85.6 mm |
E-number Finland | 3706001 |
Brand | ABB |
Last viewed
LED profile set LUMINES
Selector switch head XB4 Harmony ZB4BJ5
Instrumentation cable FRHF PYRO
Circuit breaker
Flange bolt, hexagon head, lock toothing
Casting bracket Multifix KT1
Serrated lock washer/disk, externally serrated, type A
Slotted screw Pan head ISO 14583
Cover plate 85 mm for double outlet Jussi
Circuit board support TRDLCBST