Motor protection switch MS116
MANUAL MOTOR STARTER MS116-0.25
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 0.13-0.25 A |
Adjustment range undelayed short-circuit release | 3.1-3.1 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 0.06 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 100 kA |
Degree of protection (IP) | IP20 |
Height | 90 mm |
Width | 45 mm |
Depth | 85.6 mm |
E-number Finland | 3706002 |
Brand | ABB |
Last viewed
Short connector WMT CL EG Electro deposited, Meka
Nail-in clip white TC Thorsman
Telecom outlet data, 2x Actassi CAT6A STP, straight, flush Exxact
Installation conductor H07V2-K MKEM 90
Battery cable HI-FLEX
Wall luminaire
Miniature circuit breaker MCN 6kA Hager
Flush-mounted outlet IP21 ELKO RS Nordic
Wall luminaire IP44, Dana FTLight
Smoke alarm optical EI146E