Motor protection switch MS116
MANUAL MOTOR STARTER MS116-0.4
ABB
With registration you can access the Würth Elektro online shop selection.
Motor protection switches are electromechanical main circuit safety devices. They are mainly used as manual motor power switches (ON/OFF) and for nonfused protection against short-circuiting, overloading and phase failures.
Datasheets(X)
Overload release current setting | 0.25-0.4 A |
Adjustment range undelayed short-circuit release | 5-5 A |
With thermal overload protection | Yes |
Phase failure sensitive | Yes |
Switch off technique | Thermomagnetic |
Rated operating voltage | 690-690 V |
Rated operation power at AC-3, 400 V | 0.09 kW |
Type of electrical connection of main circuit | Screw connection |
Type of control element | Turn button |
Device construction | Complete device in housing |
With integrated auxiliary switch | No |
With integrated under voltage release | No |
Number of poles | 3 |
Rated short-circuit breaking capacity lcu at 400 V, AC | 100 kA |
Degree of protection (IP) | IP20 |
Height | 90 mm |
Width | 45 mm |
Depth | 85.6 mm |
E-number Finland | 3706003 |
Brand | ABB |
Last viewed
Wire marker roll 0.75 to 4.0 mm2 Helagrip HGDC
Through standoff WESO
Plafond light Surface Bulk Head, IP65
Adapter for 50X50 centre plate Impressivo
Cable trunking, coupling DLP-S for DLP-S cable channel
Threaded insert metric ISO standard thread
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Flush-mounted outlet IP44 Exxact
Cable routing conduit FT 40 aluminium, Instal
Spring clamp KEVI 280 series, WAGO